5/16XRL 4230T COOL 75
Description
# Molded Small I.D. Coolant Hose
RECOMMENDED FOR: Engine coolant hose such as cab heater or oil cooler. Also suitable for air or water.
– CAUTION: Not for conveying fuel and oil.
– Also suitable for air or water.
– Limited oil resistance.
## Gates Gets Your Vehicles Back On The Road. And Keeps Them There.
Gates® engineers our automotive aftermarket parts in partnership with the top OEMs around the world, so you can trust premium-grade automotive and light truck parts that are built to last.
## OE Quality for the Aftermarket.
Our long-standing partnerships with automotive OEMs on production vehicles enable us to produce aftermarket parts of superior quality, durability, and performance. That experience goes into every Gates® aftermarket engine hose and accessory, bringing a range of solutions for virtually every fluid power component.
Additional information
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 64 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 7.9 |
| Hose Outside Diameter (in) | 0.62 |
| Hose Outside Diameter (mm) | 15.7 |
| Inside Diameter (in) | 0.31 |
| Inside Diameter (mm) | 7.9 |
| Working Pressure (psi) | 63 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.62 |
| Outside Diameter (mm) | 7.9 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM – Type P. Limited oil resistance. |
| Construction: Cover | EPDM – Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE – Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.15 |
