149F-4-4 - SAE 45° Flare Male Elbow
Description
## Construction
Manufactured from CA 360, CA 345 or CA377 brass
## Features
– Economical fitting resists mechanical pullout
– Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
## Installation
– Cut tubing squarely and clean tube end thoroughly to remove burrs.
– Place nut onto tube. Place threaded end of nut toward end of tube.
– Flare tube end with flaring tool to provide 45° flare.
– Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for metal-to-metal seal.
## Note
Flare tools are available, please contact Dixon for pricing and availability.
## Safety Notes
– The PSI rating given is based on a temperature of 73°F using copper tubing.
– Temperature and type of tubing used are important factors in working pressure ranges.
## Specifications
– Listed with Underwriter’s Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards).
– Reference SAE 010202
## Use
– Manufactured especially for hard-to-hold liquids and gases
– Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Additional information
| Weight | 0.05 lb |
|---|---|
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass |
| Thread | Straight |
| Tube Size | 1/4" |
| Working Pressure | 1400 PSI |
| Temperature Range | -65°F to 250°F (-54°C to 121°C) |
| Thread Size | 7/16"-20 |
| Pipe Size | 1/4" |
| Construction | Manufactured from CA 360, CA 345 or CA377 brass |
| Features | Economical fitting resists mechanical pullout Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection |
| Installation | Cut tubing squarely and clean tube end thoroughly to remove burrs. Place nut onto tube. Place threaded end of nut toward end of tube. Flare tube end with flaring tool to provide 45° flare. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for metal-to-metal seal. |
| Note | Flare tools are available, please contact Dixon for pricing and availability. |
| Safety Notes | The PSI rating given is based on a temperature of 73°F using copper tubing. Temperature and type of tubing used are important factors in working pressure ranges. |
| Specifications | Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards). Reference SAE 010202 |
| Use | Manufactured especially for hard-to-hold liquids and gases Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
