1BRS1.25-B-7 - BR-Series Pneumatic Hose Barb Coupler
Description
## Compatibility & Interchange Data
Rectus 21KA, Tomco Series SC, CEJN Series 223
## Construction
– Machined components are manufactured using solid brass bar stock.
– Stainless steel springs. Carbon steel balls and retaining rings.
– Machined components are plated with chrome-over-nickel plating.
– Nitrile (Nitrile Rubber) seals are standard
## Safety Notes
– Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer’s catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
– Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
– It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Additional information
| Maximum Operating Pressure | 300 PSI |
|---|---|
| Weight | 0.1 lb |
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass |
| Maximum OD | 0.35" |
| Body Size | 1/8" |
| Temperature Range | -40°F to 250°F (-40°C to 121°C) |
| Burst Pressure | 7000 PSI |
| Length | 1.26" |
| Hose ID | 4 mm |
| Hex | 9/16" |
| Compatibility & Interchange Data | Rectus 21KA, Tomco Series SC, CEJN Series 223 |
| Construction | Machined components are manufactured using solid brass bar stock. Stainless steel springs. Carbon steel balls and retaining rings. Machined components are plated with chrome-over-nickel plating. Nitrile (Nitrile Rubber) seals are standard |
| Safety Notes | Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application. Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death. It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure. |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
