G22306-2432X
Description
# GlobalSpiral™ Couplings
GlobalSpiral couplings are specially engineered to provide superior performance for extreme high-pressure, high-impulse spiral-wire hydraulic hose applications. They can be used with all Gates MegaSys four and six-spiral wire hose up to 6,000 psi. When used with 2-wire ferrules, GlobalSpiral couplings can also be crimped on Gates wire-braid hoses. The innovative, two-piece, no-skive design reduces assembly time, labor, fabrication errors and contamination of the fluid power system. S, M and L Drops per ISO Final Draft International Standard 12151-S.
– “Bite-the-wire” crimp for improved coupling retention.
– Tested to an industry-leading 1,000,000 impulse cycles.
– +250°F temperature capability for longer assembly life.
– Environmentally-friendly TuffCoat plating for 347 percent better corrosion resistance than the SAE Standard.
Additional information
| H2 Nut Hex (in) | 0.089 – 3 |
|---|---|
| H2 Nut Hex (mm) | 2.25 – 76.2 |
| T1 Thread (in) | 2" |
| C Cutoff (in) | 4.972 |
| C Cutoff (mm) | 126.3 |
| L Length (in) | 7.874 |
| L Length (mm) | 200 |
| Hose Inside Diameter (in) | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Inside Diameter (in) | 1.5 |
| Inside Diameter (mm) | 38.1 |
| Material | Steel |
| Customer Pack | 1 – 250 |
| Weight (lbs.) | 0.03 – 9.49 |
| T Drop (in) | 2.047 |
| C (in) | 0.93 – 7.24 |
| L (in) | 1.17 – 11.69 |
| Angle. | 45 |
| Notes | S, M and L Drops and Hex per ISO Working Draft 12151-6., Metric Hex per ISO Draft International Standard 12151-1. SAE J1453 O-Ring Face Seal., These female swivels have been marked with two small notches on the hex to identify them as the Komatsu style., See Accessories for O-Rings., SAE J1926/2 ISO 11926-2 Heavy Duty (S Series) Stud End., Includes Peroxide-cured O-Ring. Metric Hex per ISO Draft International Standard 12151-1. Utilizes SAE J1453 Captive O-Ring Groove for Improved O-Ring Retention., +13 more |
| H1 Stem Hex (in) | 0.69 – 2.56 |
| H1 Stem Hex (mm) | 17.5 – 65.02 |
| F Flange Head Thickness (in) | 9.7 |
| F Flange Head Thickness (mm) | 0.38 |
| M Flange Diameter (in) | 1.19 – 3.31 |
| M Flange Diameter (mm) | 30.2 – 84.1 |
| Working Pressure (psi) | 3000 |
| A1 Outside Diameter (in) | 0.39 – 3.35 |
| A1 Outside Diameter (mm) | 10 – 85.1 |
| A1 Tube Outside Diameter (mm) | 10 – 42 |
| Outside Diameter (in) | 0.96 – 3.35 |
| Outside Diameter (mm) | 24.4 – 85.1 |
