G20910-1010
Description
# GlobalSpiral™ Couplings
GlobalSpiral couplings are specially engineered to provide superior performance for extreme high-pressure, high-impulse spiral-wire hydraulic hose applications. They can be used with all Gates MegaSys four and six-spiral wire hose up to 6,000 psi. When used with 2-wire ferrules, GlobalSpiral couplings can also be crimped on Gates wire-braid hoses. The innovative, two-piece, no-skive design reduces assembly time, labor, fabrication errors and contamination of the fluid power system. S, M and L Drops per ISO Final Draft International Standard 12151-S.
– “Bite-the-wire” crimp for improved coupling retention.
– Tested to an industry-leading 1,000,000 impulse cycles.
– +250°F temperature capability for longer assembly life.
– Environmentally-friendly TuffCoat plating for 347 percent better corrosion resistance than the SAE Standard.
Additional information
| H2 Nut Hex (in) | 1.26 |
|---|---|
| H2 Nut Hex (mm) | 32 |
| T1 Thread (in) | M24X1.5 |
| C Cutoff (in) | 1.76 |
| C Cutoff (mm) | 44.7 |
| L Length (in) | 3.74 |
| L Length (mm) | 95 |
| Hose Inside Diameter (in) | 0.63 |
| Hose Inside Diameter (mm) | 15.9 |
| Inside Diameter (in) | 0.626 |
| Inside Diameter (mm) | 15.9 |
| Material | Steel |
| Customer Pack | 1 |
| Weight (lbs.) | 0.45 |
| T Drop (in) | 0.35 – 17.717 |
| C (in) | 1.76 |
| L (in) | 3.74 |
| Angle. | 15 – 135 |
| Notes | These female swivels have been marked with two small notches on the hex to identify them as the Komatsu style. |
| H1 Stem Hex (in) | 1.18 |
| H1 Stem Hex (mm) | 30 |
| F Flange Head Thickness (in) | 0.27 – 14.2 |
| F Flange Head Thickness (mm) | 0.27 – 14.2 |
| M Flange Diameter (in) | 1.19 – 3.31 |
| M Flange Diameter (mm) | 30.2 – 84.1 |
| Working Pressure (psi) | 3000 – 6000 |
| A1 Outside Diameter (in) | 0.39 – 3.35 |
| A1 Outside Diameter (mm) | 10 – 85.1 |
| A1 Tube Outside Diameter (mm) | 10 – 42 |
| Outside Diameter (in) | 0.96 – 3.35 |
| Outside Diameter (mm) | 24.4 – 85.1 |
