2X100 FOOD DRY GOODS 150SD
Description
# Food Master™ Dry Goods SD
RECOMMENDED FOR: Transfer of bulk food products via suction, pneumatic or gravity systems where FDA sanitary tube is required. Examples: Flour, sugar, syrup and edible grains.
– CAUTION: Do not use for any type of edible or non-edible oils, acetic foods, or solvents. This includes mustard, vinegar, vegetable oils, and food grade sanitizers. Scheduled visual inspections of the tube and cover is necessary for food safety, optimal performance, and hose longevity. Eliminating bends in hose routing, periodically rotating hose and preventative replacement cycles are recommended. Immediately replace any hose that shows tube or cover deterioration.
– Monofilament helix is crush and kink-resistant; built on polished stainless stell mandrels to prevent rust.
– Formulated to meet applicable Sanitary FDA criteria.
– Excellent resistance to abrasion.
Additional information
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +150°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.75 |
| Hose Outside Diameter (mm) | 69.9 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.75 |
| Outside Diameter (mm) | 50.8 |
| Thickness (in) | 0.19 |
| Thickness (mm) | 5 |
| Color | Gray |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Natural Rubber – Type D2. Limited oil resistance. |
| Construction: Cover | EPDM – Type P |
| Standards | Tube meets FDA requirements. |
| Standards: Tube | Meets applicable FDA requirements |
| Recommended For | Transfer of bulk food products via suction, pneumatic or gravity systems where FDA sanitary tube is required. Examples: Flour, sugar, syrup and edible grains. |
| Caution | Not recommended for vinegar, mustard or other compounds containing acetic acid. |
| Customer Pack | 100 |
| Weight (lbs.) | 1.76 |
| Temperature Range | -40°F to +150°F (-40°C to +66°C) |
| Coupling Recommendation | 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. |
| Cover | EPDM – Type P. Corrugated. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Natural Rubber – Type D2. White. Limited oil resistance |
