307-16-362
Description
GENERAL PROPERTIES FDA Grade, meets FDA 21 CFR 177.2600 as well as Dairy 3A Specs Excellent resistance to petroleum- based hydraulic fluids Wide range of service temperatures Very good resistance to alkalis and acids POLYMER Nitrile (NBR), Styrene-Butadiere (SBR)
Additional information
| Polymer | Nitrile, Styrene-Butadiere |
|---|---|
| Grade | Industrial |
| Finish | Smooth |
| Powder | No |
| Color | White |
| Temperature [Min] | -40 ºC -40 ºF |
| Temperature [Max] | 93 ºC 200 ºF |
| Series | AB-366 |
| ASTM Specification (SI units) | D2000: 1BF610 FDA Compliant |
| Durometer | 60 |
| Tensile Strength min. | 1000 psi |
| Elongation min. | 300 % |
| Type | Industrial Sheets |
| Brand | American Biltrite |
| Note | Maximum pieces per roll: 2 • Minimum piece length: 10' • Width tolerance: -0 / +1" Meets the requirements for FDA 21 CFR 177.2600: "Rubber articles intended for repeated use may be safely used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section." Material is within commercial sheet rubber gauge tolerances. The documentation for sheet rubber gauge tolerances is published on our website. Please ensure the product meets your application specification prior to order placement. The website version prevails. Total roll length may vary by -±10% for domestically manufactured (AB-366) Series. |
| Gauge x Width | 1/4 x 36 in |
| Avg. Length (Linear Ft. /Roll) | 40 ft |
| Surface | 120 sft |
| Approx. Lbs./Roll | 225 lb |
