2LM2-B - L-Series Lincoln Pneumatic Male Threaded Coupler
Description
## Compatibility & Interchange Data
– Lincoln Long-Nose Automotive Interchange
– Parker 70-Series, Tomco Series-1110, Coilhose Type-17
## Construction
– Machined components are manufactured using solid bar stock.
– Stainless steel springs. Carbon steel balls and retaining rings.
– Nitrile (Nitrile Rubber) seals are standard
– Steel componentry is plated using ROHS Compliant Trivalent Chrome.
## Safety Notes
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Additional information
| Maximum Operating Pressure | 300 PSI (21 bar) |
|---|---|
| Weight | 0.25 lb |
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass |
| Maximum OD | 0.72" (18.3 mm) |
| Thread | NPT |
| Seal | Nitrile |
| Body Size | 1/4" |
| Temperature Range | -40°F to 250°F (-40°C to 121°C) |
| Burst Pressure | 5000 PSI (345 bar) |
| Thread Size | 1/4"-18" |
| Length | 2.62" (66.5 mm) |
| Hex | 3/4" |
| Flow | DELTA P=15 PSI 21 CFM |
| Compatibility & Interchange Data | Lincoln Long-Nose Automotive Interchange Parker 70-Series, Tomco Series-1110, Coilhose Type-17 |
| Construction | Machined components are manufactured using solid bar stock. Stainless steel springs. Carbon steel balls and retaining rings. Nitrile (Nitrile Rubber) seals are standard Steel componentry is plated using ROHS Compliant Trivalent Chrome. |
| Safety Notes | It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure. |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
