639C-04 - Compression Seal Plug
Description
## Applications
– Use with copper, aluminum and thermoplastic tubing.
– Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
## Installation
– No flaring, soldering or other preparation of tubing necessary to assemble
– Slide nut, then sleeve onto tubing. The thread end of the nut must face out.
– Insert tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
– Assemble nut to body, and tighten hand-tight. Then follow the number of appropriate wrench turns for the given size.
## Note
Temperature and type of tubing used are important factors in working pressure ranges. Pressure rating given at 73°F (23°C). For thermoplastic tubing, see manufacturers recommendation for pressure range.
## Safety Notes
– Not recommended for steel tubing
– Not recommended for applications using gaseous media.
## Specifications
– Underwriter’s Laboratories listed for flammable liquid
– SAE J-512
– ASA
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Additional information
| Weight | 0.03 lb |
|---|---|
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass |
| Thread | Straight |
| Tube Size | 1/4" |
| Temperature Range | -65°F to 250°F (-54°C to 121°C) |
| Thread Size | 7/16"-24 |
| Length | .74" |
| Hex | 7/16" |
| Applications | Use with copper, aluminum and thermoplastic tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. |
| Installation | No flaring, soldering or other preparation of tubing necessary to assemble Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Insert tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. Assemble nut to body, and tighten hand-tight. Then follow the number of appropriate wrench turns for the given size. |
| Note | Temperature and type of tubing used are important factors in working pressure ranges. Pressure rating given at 73°F (23°C). For thermoplastic tubing, see manufacturers recommendation for pressure range. |
| Safety Notes | Not recommended for steel tubing Not recommended for applications using gaseous media. |
| Specifications | Underwriter's Laboratories listed for flammable liquid SAE J-512 ASA |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
