2720404SS - Male NPTF x Push-on Hose Barb
Description
## Construction
Dryseal
## Installation
– Assembly Instructions:
– 1. Trim hose end with smooth square cut.
– 2. Lubricate either push-on fitting, hose or both.
– 3. Insert push-on fitting into hose until first barb is in hose.
– 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
## Instructions
– Disassembly instructions:
– 1. Leaving push-on fitting in place, make a 1″ cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
– 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
## Note
No hose clamps or ferrules are needed
## Safety Notes
– Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
– Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
## Specifications
– Number of Barbs: 2
– Barb Length: .77″
Additional information
| Weight | 0.035 lb |
|---|---|
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | 303 Stainless Steel |
| Component Material | Yellow Plastic Cap |
| Male Thread | NPT |
| Temperature Range | -40°F to 150°F |
| Length | 1.61" |
| Hose ID | 1/4" |
| Hex | 9/16" |
| Male Thread Size | 1/4"-18 |
| Pressure Rating | 350 PSI |
| Construction | Dryseal |
| Installation | Assembly Instructions: 1. Trim hose end with smooth square cut. 2. Lubricate either push-on fitting, hose or both. 3. Insert push-on fitting into hose until first barb is in hose. 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap. |
| Instructions | Disassembly instructions: 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose. 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose. |
| Note | No hose clamps or ferrules are needed |
| Safety Notes | Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only. Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap. |
| Specifications | Number of Barbs: 2 Barb Length: .77" |
| Number of Barbs | 2 |
| Barb Length | .77" |
